Riflecx Bore Foam

Why do I need foam?

After all, I can use remover and notch, remover and notch, remover and notch….

You can…

BUT you will never clean the barrel as thoroughly as with our foam. Thanks to its unique formulation, it stays expanded in the barrel for 10 minutes thoroughly cleaning every millimetre of the barrel tube.

Thick, it doesn’t run off after a few minutes but just keeps working.

You don’t have to take the trouble of scrubbing the barrel with a cleaning rod – simply set the filled foam aside and clean the rest of the weapon with Riflecx in peace and quiet. After ten minutes, simply wipe the barrel with two or three wipes, a soft bristle brush and voila! you have a mirror barrel.

The foam, although intensive and removing powder residues (carbon build-up) and baked-on copper, nickel and lead deposits, is safe for the barrel grooves – suitable for all firearms. Thanks to its 60 cm long tube, it can be used to clean barrels of any length.

It can also be used to clean gas pipes.

It gives you peace of mind without worrying about rust on your equipment.

Method of use:

• Excellent for cleaning the barrel even when it is of considerable length. Foam application is made possible by a 60 cm tube so that the foam tightly fills every centimetre. The foam reacts with dirt, softening it – which makes it easier to clean it later with the cleaning wipers.
• Unlike many other foams – RifleCX foam retains its density throughout the duration of its action – which translates into a thorough cleaning of the barrel.
• After application, it remains in place for approximately 10 minutes. We recommend the subsequent use of a squeegee to ensure that the barrel is perfectly clean. then use a wipe until any remaining dirt is removed. Then use a felt tip. Discolouration may occur with poor quality oxyde. We recommend performing a control test on a small area of metal.

Parameters:

• Alkaline cleaner specially developed for barrel cleaning.
• The composition ensures excellent wetting of the surfaces to be cleaned and effective emulsification of
• The composition ensures excellent wetting of the cleaned surfaces and effective dirt emulsification, so that you do not have to repeat the foam application, saving time and money.
• The preparation consists of specially selected sets of compounds.
• surface-active compounds, as well as corrosion inhibitors, which, despite the fact that it is an aqueous product, will prevent metal corrosion.
• It removes gunpowder residues, carbon build-up and other dirt from the barrel tube.
• Leaves no residue on cleaned surfaces.
• The 60 cm long tube allows accurate application even in very long barrels.
• Capacity: 500 ml.  action in any position of the can.